Language
Call us on 682 350 0300

Sampete Group

Trinidad & Tobago, Latin America
A CDE Sand Washing Plant was installed with the Sampete Group and has been running for 15 years. The project includes an AquaCycle and an EvoWash.

Tonnage

120TPH

Material

Sand & Gravel, Claybound Aggregates, Quarry Waste

Output

0-6mm Sand

End Use
Construction Products

THE CHALLENGE

In November 2006 a CDE Sand Washing Plant was installed with the Sampete Group based in Wallerfield Armia, Trinidad. Before this installation the raw material had been stockpiled as waste, comprising the efficiency of several limestone quarries in the east. It provided a considerable challenge for traditional systems as it is overburden mixed with clay-bound material which is extremely plastic in nature. The feed is heavily contaminated and often up to 50% of the minus 5mm material can be less than 75 microns.

Sampete-Group-670x520

THE SOLUTION

Sand slurry leaving the primary screen is piped to the new CDE compact sand plant which is rated at over 100tph. This plant has no trouble in handling the high clay volumes (up to 50% in the sand fraction) in the feed. Slurry is fed directly into the sump and is then sent to the custom sized hydrocyclone by a Warman pump. The silt cut point can be set to suit customer’ specific product requirements but here the sand consistently contains less than 3% minus 75 microns. From the base of the hydrocyclone the sand is fed on to the high efficiency dewatering screen and is discharged over a rubber-lined chute to a conveyor for stockpiling at less than 12% moisture content. The wastewater containing the clays pass directly to an 8m diameter high-rate thickener complete with a fully automatic Polyelectrolyte dosing station for further treatment.

Wastewater treatment is the most crucial element of the entire plant and often the key challenge for the efficiency and productivity. Given the dirty nature of the feed many traditional systems would demand larger volumes of water which is not always practical in quarry operations.

“The new CDE plant significantly delivered consistently high-quality sand from the raw material, generating maximum commercial output. Once again proving that traditional barriers to washing difficult materials have been relegated to the past with CDE’s innovative washing system.”
Gustavo Brasil, Business Development Executive at CDE

THE RESULTS

Currently the complete plant operates at up to 120tph which averages approximately 13 tons per hour of waste solids. Polyelectrolyte dosing is carefully monitored to ensure correct sludge settlement / comparison without any risk of flocculent carryover in the recycled water. This water can then be recycled to the main reservoir or back to the sand plant. The thick sludge (like yogurt) is sent to a settling pond for further settlement via a Warman pump. Final solid content in the sludge approximately 50%. Only 15% top up water is required for the plant to run continuously.

You May Be Interested in These Projects
; ;