Language
Call us on 682 350 0300

Tarmac (Snabe Quarry)

Scotland
The wet processing of lignite contaminated materials can bring significant advantages.

Tonnage

480tph

Material

Lignite Removal

Output

2 Sands | 2 Aggregates

End Use
Construction Products
Tarmac-Snabe-Feed-Material-670x520

Feed material on conveyor

THE CHALLENGE

The contamination of sand and gravel deposits with lignite and the development of processing systems to deal with this contamination is evidence that there is increasing pressure to process materials that were previously overlooked.

Lignite in itself can be a very useful commodity being a soft brown fuel, the characteristics of which put it somewhere between coal and peat, used for energy and heating. However, when lignite is present in deposits of sand and gravel it presents a significant problem for companies such as Tarmac as it will compromise the final quality of the sand and aggregate products. In seeking to process this material effectively the specification of a system that is tried and tested in the effective removal of this lignite material is key.

Tarmac-Snabe-Sand-Washing-Plant-670x520

Sand washing plant at Snabe Quarry

THE SOLUTION

When developing the right solution, operators are looking for performance guarantees. This is a reflection of the detrimental effect lignite in final products will have on commercial viability.

The CDE plant at Snabe Quarry has been custom built to specifically tackle the individual characteristics of the feed material at the site. The plant’s performance is measured by a set of pre-defined production requirements including final levels of lignite in the sand and aggregate products. 

The plant includes a wide range of equipment from the CDE portfolio including its ProGrade screens, numerous feed, stockpile and transfer conveyors in various configurations and its Counter Flow Classification Unit (CFCU) system for the washing of the lignite contaminated sand product. 

Tarmac-Snabe-Clean-Sand-Stockpile-670x520

Clean sand stockpile at Snabe Quarry

THE RESULTS

The plant in operation at Snabe Quarry has a capacity of 480tph and is producing two commercial sand products – a concrete sand and a building sand – as well as a 5-10mm and 10-20mm aggregate product.

Since commissioning at Snabe Quarry the plant has exceeded the requirements detailed in the extensive performance guarantees drafted by Tarmac. First, and most significantly, lignite is being effectively removed – the final lignite content was required by the performance guarantees to be 0.05% by mass. This is being comfortably exceeded with Tarmac reporting levels of 0.03% by mass during the regular tests that they undertake on the final products. Moreover, the requirements relating to capacity and the moisture content of the final products have never been called into question. The plant enables Tarmac to deliver significant volumes of material to the local market that would otherwise not have been available.

You May Be Interested in These Projects
; ;